Porcelain Crown Balcova

Porcelain crown is one of the most important types of dental crowns. There are two types of porcelain veneers - Porcelain coating with metal infrastructure: There is a metal cap on the inside of the coating to increase durability. This hat has aesthetic porcelain on it. But the metal gray matte competes and spoils the aesthetics and is old technology. We do not recommend it to our patients. - Full porcelain EMPRESS veneers: This is the type of porcelain veneer applied in our clinic. There is no metal in it. Instead of metal, aesthetic porcelain strengthened under high pressure and temperature is used. In this way, light transmittance is better and you have a more natural porcelain coating that is more biocompatible and tooth-friendly. When applying porcelain veneer, you should pay close attention to the difference between these two options. Dentapoint International is one of the largest dental hospitals in Izmir and one of the few in Turkey, with its experienced and dynamic staff. It applies the most accurate treatment methods with digital dentistry.

Dental Crowns serve as an extraordinary solution for aesthetic purposes, allowing individuals to achieve a beautiful and natural-looking smile. When teeth are discolored, misshapen, or have visible flaws, cosmetic dental crowns provide an effective method of improvement. What should you pay attention to if you are going to have a dental crown? Impression: A good impression is essential for a good dental crown. Measurements taken with 3D scanners and teeth created with 3D printers are more aesthetic and harmonious. In our clinic, 3shape trios 5 pod scanner is used. Material: There are many types of zirconium. Monolithic zirconium gives better results for your rear chewing teeth, and Emax zirconium gives better results for your front teeth. In our clinic, Dental Direkt zirconium and Ivoclar brand porcelain are used. Adhesive: composite-based resin adhesives give much better results. It doesn't smell or fall off. The adhesive is as important as the crown itself. In our clinic, GC Fujicem Evolveb adhesive and Panavia™ SA C. Univ. Automix adhesive is used Doctor: A good crown is better applied by a prosthodontist, one of the specialties of dentistry. All this is important. You should not have a crown treatment without questioning these. Dentapoint International is the largest clinic in Izmir with its experienced and dynamic staff. It is one of the few dental hospitals in Turkey. Applies the most accurate treatment methods with digital dentistry

Zirconia crowns represent the latest advances in dental technology and offer a durable and aesthetically pleasing solution for dental restorations. You must have heard and read about zirconium coating many times and talked to your acquaintances who have had it done. We will explain what you should pay attention to when having zirconium teeth. 1- Material brand and quality: Zirconium is a natural mineral that is made to be applied to teeth at high pressure and temperature with a complex technology. It is produced in many countries. Germany, Brazil, Pakistan, Turkey and China are the countries that produce the most zirconium tablets. Tablets produced with German technology have high durability. In our clinic, Dental Direct zirconium tablets made in Germany are used. 2- Measurement: Dentistry is the branch of medicine that needs technology the most. There may be tooth-crown compatibility problems in measurements taken with old methods. This sensitivity may cause decay in the underlying tooth. For this reason, digital measurements must be taken with 3D Scanners. Digital measurements are not only the primary requirement for perfect zirconia, but also very important for patient comfort. In our clinic, 3shape trios 5 pod scanner is used. 3- Adhesive: Old-style adhesives based on powder-liquid mixture are problematic. It smells, melts, causes sensitivity and as a result, the crown falls off. Composite-based resin adhesives are best. It is essential to use this. In our clinic, GC Fujicem Evolveb adhesive and Panavia™ SA C. Univ. Automix adhesives are used. 4- Doctor and Technical team: dentistry includes both medicine, aesthetics and engineering. An inexperienced team without an aesthetic perspective will not produce good results.